CSI Solar HiKu7 CS7N-645-675MS

Fotovoltaici.info
电 池 技 术: 背钝化 (PERC)
功率范围: 665 Wp
地区: 意大利 意大利
联系销售商
注意: 您的询盘将直接发送至Fotovoltaici.info

替代产品

HT Series TOPC...

弘元光能(无锡)有限公司
  • 电 池 技 术: 双面,TOPCon
  • 组件尺寸: 2278x1134x30 mm
  • 重量: 32.1 kg
  • 电池片规格: --
  • 玻璃厚度: 2 mm

产品特点

类型 单晶硅
产品型号
CS7N-665MS
质量保证  
产品质量保证 12 年
功率输出保证 12年期91.4%输出功率保证,25年期84.8%输出功率保证
电性能参数(STC)  
峰值功率 (Pmax)
665 Wp
峰值工作电压(Vmpp)
38.5 V
峰值工作电流(Impp)
17.28 A
开路电压(Voc)
45.6 V
短路电流(Isc)
18.51 A
组件效率
21.4 %
功率偏差(正)
+ 1.5 %
  标准测试条件(STC):太阳能辐射通量1000W/m2,大气参数1.5,组件温度25℃。
电性能参数(NOCT)  
峰值功率 (Pmax)
499 Wp
峰值工作电压(Vmpp)
36.1 V
峰值工作电流(Impp)
13.83 A
开路电压(Voc)
43.1 V
短路电流(Isc)
14.93 A
最大耐久温度 41±3 °C
  电池片标称工作温度(NOCT):太阳能辐射通量800W/m2,大气参数1.5,环境温度20℃,风速1 m/s。
温度特性  
工作温度 -40~85 °C
温度系数(Pmax) -0.34 %/°C
温度系数(Voc) -0.26 %/°C
温度系数(Isc) 0.05 %/°C
系统集成参数  
最大系统电压 1500 V
保险丝额定电流 30 A
物理参数  
组件尺寸(高/宽/厚) 2384x1303x35 mm
重量 34.4 kg
电池片数量 132
玻璃类型 防反射镀膜,钢化
玻璃厚度 3.2 mm
边框类型 阳极氧化铝
旁路二极管数 3
接线盒防护等级 IP 68
连接器类型 MC4
电缆截面 4 mm2
电缆长度 360 mm
PDF  
下载公司产品详情

Fotovoltaici.info

+39 3421 648 029
https://www.fotovoltaici.info
意大利
Via Cesare Battisti 24, 40018, San Pietro in Casale, Bologna
注意: 您的询盘将直接发送至Fotovoltaici.info
公司描述

We are a dynamic company full of experience resulting from over 50 years of activity in the world of renewable energy, photovoltaic, wind, thermal, and hydroelectric.

We have designed and supplied materials for thousands of renewable energy production facilities around the world.

We boast collaborations with the major manufacturers and a list of excellent references that are difficult to find in other companies in the sector.

来自Fotovoltaici.info的其他9个系列产品‎

  • ¥0.661 / Wp *
    AS-7M120-HC-4...
    460 Wp 背钝化 (PERC)
  • ¥0.630 / Wp *
    AS-7M144-BHC-...
    550 Wp 双面,背钝化 (PERC)
  • ¥0.665 / Wp *
    AS-8M132N-BHC...
    700 Wp 双面,TOPCon
  • TOPHiKu6 CS6R...
    440 Wp TOPCon
  • Tiger Neo 54H...
    440 Wp TOPCon
  • Tiger Neo 60H...
    480 Wp TOPCon
  • Tiger Neo 72H...
    580 Wp TOPCon
  • TOPHiKu6 CS6W...
    585 Wp TOPCon
  • HiKu7 CS7L-58...
    605 Wp 背钝化 (PERC)